Customer Feedback for Procore Technologies, Inc.
Welcome to the Customer Feedback Forum for Procore.
We’d like to hear any ideas you have for how we can improve Procore. Please use this forum to suggest features you’d like to see added to Procore. You may also vote and comment on product ideas suggested by other Procore users.
This forum is actively monitored by Procore’s Product Management Team.
-
Custom Columns For Drawings
When viewing the main drawing pages, it would be helpful to be able to create custom columns. For example: From the main Drawings page, to add a custom column to indicate a status such as "under review" so all subs on the job will know which drawings may be changing.
80 votesReviewed - Not Prioritized for Development ·AdminDelia Garcia (Strategic Product Consultants, Procore) responded
Thank you for your feedback! We have shared your post with the development teams. We will update this space if we have any questions or change the status.
-
Specification Markups
Create the ability to markup spec sections just like drawings. Many markups apply to both drawings and specs.
1,235 votesReviewed - Not Prioritized for Development ·AdminDelia Garcia (Strategic Product Consultants, Procore) responded
We wanted to take a minute to share more as this request is our top rated and we’re so grateful for the continued input that each of you provided. At Procore, our vision is to improve the lives of everyone in construction. Building software to improve the lives of all roles within construction is so important to us and we continue to pursue this every day. The opinions each of you share here is critical to helping us understand if we’re heading the right direction. So, thank you!
We know this will be a very valuable feature and this is something that we’re actively working towards. There is some underlying technology that we need to improve before we feel confident to deliver a feature like this at the scale of supporting various roles and project types in construction. So while we may not yet be able to update this ticket…
-
Drawings Bulk Overlay Tool Fixes
New bulk overlay tool needs some fixes
https://support.procore.com/products/online/user-guide/project-level/drawings/tutorials/compare-drawing-revisions#BulkCompareaDrawingSettoitsPreviousVersion1) output is on 8.5x11, should be on original drawing size
2) output is portrait, should be landscape
3) output is such low res as to be less than useful111 votesReviewed - Not Prioritized for Development ·AdminZenette Dorsey (Strategic Product Consultant, Procore) responded
Thank you for your feedback! We do plan on adding these enhancements in the future and will update this space when it has been prioritized.
-
Orientation and Cut-off of Compare Drawing Revisions Export
Compare Drawings Revisions export should be formatted to fit on sheet in landscape as opposed to orientated across a portrait sheet.
7 votes -
RFI link on drawings bypasses "Permissions" and "Private" settings
Published RFI's on drawings are accessible by any user that has "Read Only" or higher permissions on the drawing tool. this allows a user with permissions of "NONE" on the RFI tool to read the RFI questions and the "Official Response" in the popup on the drawing. They can also download attached PDFs from the popup.
This includes RFIs marked as "Private"!
12 votesReviewed - Not Prioritized for Development ·AdminDelia Garcia (Strategic Product Consultants, Procore) responded
Thank you for your feedback! We have shared your post with the development teams. We will update this space if we have any questions or change the status.
-
mobile drawing markup filters
Drawings - Markup Filtering
Currently, the Drawing Tool (on the web interface) allows for filtering of markups based on either all shown or none shown. And the Drawing Tool on the mobile device (iOS) has the same all shown or none shown (with the exception of punchlist).
With large quantities of markups (lets say Observations), the Drawings become overwhelmed. Yes, you can filter them all off, but it would be beneficial to see only the 'Active' items. This would allow you to visually see what is remaining while also being able to see the drawing.17 votesReviewed - Not Prioritized for Development ·AdminDelia Garcia (Strategic Product Consultants, Procore) responded
Thank you for your feedback! We have shared your post with the development teams. We will update this space if we have any questions or change the status.
-
Customized Cloud Markup Shape
Ability to create customizable cloud shape and orientation (ie, polygon function and/or ability to rotate the rectilinear cloud after it has been drawn)
10 votesReviewed - Not Prioritized for Development ·AdminDelia Garcia (Strategic Product Consultants, Procore) responded
Thank you for your feedback! We have shared your post with the development teams. We will update this space if we have any questions or change the status.
-
Ability to select where Discipline pulls from when using option to Get From Filename in Drawings
Must format file names in a specific way, where they are always leading with the same letter. Due to this, the discipline is being read as the same on each drawing. It would be nice if we could establish where the discipline pulls from when using option to Get from Filename.
3 votes -
[Extracts] - Drawing markups for submittals, RFIs, etc. link to a PDF of the related item rather than to the procore web page for that item
Currently, when you extract drawings that have markups and more specifically markups with links to submittals, RFI's, etc, using Procore Extracts the hyperlinks contained in the extracted drawings take you to the Procore web page for that item. In 20 years, if we no longer have Procore this feature will not be helpful at all. It would be much more practical if these linked RFI's on drawings hyperlinked to the correlating PDF of that item instead.
15 votesReviewed - Not Prioritized for Development ·AdminDelia Garcia (Strategic Product Consultants, Procore) responded
Thank you for your feedback! We have shared your post with the development teams. We will update this space if we have any questions or change the status.
-
Custom Fieldsets on Drawings - Apply to Sets when Uploading and Bulk Edit
You are now able to add a custom fieldset to Drawings; however, it is only available to add to an individual sheet by clicking on the Info tab and editing the drawing information.
Procore should show the custom fieldset when uploading a drawing set so it can be applied to the entire set, and it should be available when you Bulk Edit drawings.15 votesReviewed - Not Prioritized for Development ·AdminDelia Garcia (Strategic Product Consultants, Procore) responded
Thank you for your feedback! We have shared your post with the development teams. We will update this space if we have any questions or change the status.
-
[Drawings] Have the ability to realign drawings on the web
Have the ability to realign drawings on the web in the same fashion that you can do it on the mobile application. Currently this action is limited to the mobile app, and it should be available for web version as well for in office users.
6 votes -
[Drawings] - Export Specific Drawing Sets
Would like the option to export selected drawings sets and the drawings within as a list in a single PDF, rather than exporting all or nothing
3 votes -
Create observations in drawings from my desktop.
Currently we can only create an observation on the drawings on a mobile device. I would like to be able to create observations on my Windows desktop device on drawings.
3 votes -
Drawing Report Current "AS OF"
There needs to be an option to run a drawing list for current "as of" a specific date. Sometimes we need to resend a drawing exhibit or amend one after we have uploaded other revisions.
4 votes -
Drawings- ability to include other file types as single item in Drawings
It would be incredibly helpful for our team if we had the ability to include a different file type, such as a schedule, in the drawings tool. This will allow us to upload a "schedule" document (which is not a drawing but comes with the drawings) to the particular "drawing set" that it is associated with.
That way, when we give a bidder permission to review the drawing set - they also have the schedule in hand, without the added steps of creating a permission controlled folder in the document tool.
2 votes -
Print without Downloading
Print drawings directly from Procore without having to download
2 votes -
drawing markup 360 photos
Allow 360 photo markups on drawings to be viewable from the drawings tool
2 votes -
specifications transfer between projects
Allow to transfer to a different projects without needing to go through the upload/review process again
4 votes -
Google Map Link to Street Names
Ability to link Google Maps to street names on drawings
18 votesReviewed - Not Prioritized for Development ·AdminDelia Garcia (Strategic Product Consultants, Procore) responded
Thank you for your feedback! We have shared your post with the development teams. We will update this space if we have any questions or change the status.
-
Create Punch List Item in the Drawings Tool (Web)
You can only create a punch list item from the drawings too in the app. Please allow this in the web version! I have to flip back and forth and it is so inefficient.
2 votes
- Don't see your idea?